| Product Advantage | Product Parameters |
| 1.Independent intellectual property rights and product patents | 1.Box airtightness: Unit leakage rate ≤ 0.1% per minute at+1000Pa |
| 2.Automatically generate tables | 2.Pressure resistance of the box: The detection pressure is ≥ ± 2500 Pa, maintained for 10 minutes, and there is no obvious deformation of the appearance. |
| 3.Suspected omissions will be automatically rechecked | 3.Filter leak detection method: It can be manually scanned in situ for leak detection. |
| 4.Accurately reflect leakage points | 4.Efficient filter filtration efficiency: ≥ 99.99% @ (0.3~0.5) μ M. |
| 5.Scan results cannot be manually changed | 5.Rated air volume: 250m3/h~2500m3/h (depending on different models). |
| 6.No scanning dead corners | 6.Filter resistance: The initial resistance of the high-efficiency filtration section at the rated air volume is ≤ 250Pa. |
| 7.High control accuracy | 7.Resistance monitoring method: mechanical differential pressure gauge |
| 8.Verification of disinfection effect |
| Product Advantage | Product Parameters |
| 1.Independent intellectual property rights and product patents | 1.Box airtightness: Unit leakage rate ≤ 0.1% per minute at+1000Pa |
| 2.Automatically generate tables | 2.Pressure resistance of the box: The detection pressure is ≥ ± 2500 Pa, maintained for 10 minutes, and there is no obvious deformation of the appearance. |
| 3.Suspected omissions will be automatically rechecked | 3.Filter leak detection method: It can be manually scanned in situ for leak detection. |
| 4.Accurately reflect leakage points | 4.Efficient filter filtration efficiency: ≥ 99.99% @ (0.3~0.5) μ M. |
| 5.Scan results cannot be manually changed | 5.Rated air volume: 250m3/h~2500m3/h (depending on different models). |
| 6.No scanning dead corners | 6.Filter resistance: The initial resistance of the high-efficiency filtration section at the rated air volume is ≤ 250Pa. |
| 7.High control accuracy | 7.Resistance monitoring method: mechanical differential pressure gauge |
| 8.Verification of disinfection effect |
